Using the Configuration Menu Functions
Using the Configuration Menu Functions
"Reset All" Menu
Video
Audio
Effect
Setting
User's Logo
Advanced1
Advanced2
About
Reset All
[
]: Select
[
]: Execute
Sub-menu
Execute
Execute
[Menu]: Exit
Function
Resets all items in all configuration menus to their default
settings.
•Press the [Enter] button on the remote control or the
[Auto/Enter] button on the projector's control panel to
reset.
•Select "Reset" in an individual sub-menu such as the
"Video" or "Audio" menu to reset only the settings for the
items in each sub-menu.
•This function will not reset the "Computer Input", "BNC
Input", "User's Logo", "Language", "Projector ID",
"Network" and "Lamp" settings.
This cannot be reset to the initial setting if the "User's
Logo Protect" function of Password Protect has been set to
"ON" and "No-Signal Msg." or "A/V Mute" is set to
"Logo", or "Startup Screen" is set to "OFF".
User's Guide
95
Default
-
p.61