Part number Remote Control Range Batteries Mouse Compatibility Supports PS/2, USB, ADB 1/01 EPSON PowerLite 505c/715c Projector Poly-silicon Thin Film Transistor (TFT) Diagonal: 0.9 inch (22.9 mm) F=2.0 to 2.2, f=35 to 42 mm × 1024 768 pixels (715c native format) ×...
Page 2
HDTV1125P NTSC SECAM The image is resized so that it displays using one of the projector’s native formats (PowerLite 505c only). The image is resized so that it displays using one of the projector’s native formats (PowerLite 505c and 715c).
❏ Make sure there is plenty of space for ventilation around and under the projector. ❏ Make sure the projector is within 6 feet of a grounded electrical outlet or extension cord. If you’re using a computer and/or video source, locate them within 5 feet of the projector.
3. Use the tab on the lens ring to rotate the ring and extend the lens. 4. Squeeze the lens cap tabs and remove the lens cap. Caution: Do not use the projector with the lens cap in place. The heat generated by the lens can damage the cap. Power 5.
If the projected image isn’t square or has a “keystone” shape, try the following: ❏ If your image looks like projector off to one side of the screen, at an angle. Move it directly in front of the center of the screen, facing the screen lens ring squarely.
30 minutes, it automatically turns off the lamp and enters “sleep mode.” This conserves electricity, cools the projector, and extends the life of the lamp. If you are done using the projector, unplug the power cord. If you want to start projecting again, press the button.
The remote control lets you access all of your projector’s features from anywhere in the room (up to 30 feet away). You can use it to turn the projector on and off, zoom the image, and highlight your presentation, for example.
EPSON PowerLite 505c/715c Projector Caution: Press the button carefully to avoid breaking it. Make sure the button is pressed in before you store the projector in a carrying case or box. 3. Press the button to insert it in the slot.
(such as an artist’s camel-hair brush). If the dirt is difficult to remove or if the filter is torn, replace it. Contact your dealer or call EPSON at (800) 873-7766 in the United States and Canada to obtain a new one.
Touching the glass portion of the lamp will result in premature lamp failure. Contact your dealer or call EPSON at (800) 873-7766 in the United States and Canada for a replacement lamp. Request ELPLP14.
VGA to 13W3 video cable (for connecting to certain high-end workstations) Component video cable (D-sub 15-pin to 3BNC) You can purchase these accessories from your dealer or by calling EPSON at (800) 873-7766; or visit the EPSON Store at www.epson.com (U.S. sales only). In Canada, please ™...