Connecting Usb Devices (Digital Camera, Hard Disk Drive Or Memory Devices) (Emp-7950 Only); Connecting Usb Devices - Epson EMP-7950 User Manual

Connecting USB Devices (Digital Camera, Hard Disk Drive or Memory Devices) (EMP-7950 only)

USB1.1-compatible digital cameras, hard disk drives and USB storage devices
can be connected to the projector. Image files that are stored inside the digital
camera and scenarios, images and movies that are stored inside USB storage
devices can be played back with EasyMP CardPlayer.
Presentation (Using the CardPlayer)" in the EasyMP Operation Guide

Connecting USB Devices

The following procedure describes how to connect USB devices, using a
digital camera as an example.
Connect a digital camera to the projector using a USB cable provided with,
or specified for use with your digital camera.
TIP
• Use a USB cable less than 3m in length. If the cable exceeds 3m,
CardPlayer may not function correctly.
• Check that there is no wireless LAN card or memory card in the
projector's card slot before connecting any USB device.
"Showing the
To USB port of digital camera
CAUTION
• If you use a USB hub, the connection may not operate correctly.
Devices such as digital cameras and USB storage devices should be
connected to the projector directly.
• When using a USB-compatible hard disk, be sure to connect the AC
adaptor supplied with the hard disk.
USB cable
To [USB Type A] port
User's Guide
32