Epson EMP-7950 User Manual page 92

Using the Configuration Menu Functions Using the Configuration Menu Functions
Sub-menu
Standby Set to "Network ON" to use network monitoring and
Mode control functions and the standby monitor out function
while the projector is in standby mode.
To enable the new settings, turn the projector's power off
and wait until the cool-downg
*When set to "Network ON", the Power indicator will flash
orange and then remain orange after disconnecting the
power plug and reinserting it into the electrical outlet.
Language Sets the language for message displays.
•Press the [Enter] button on the remote control or the
[Auto/Enter] button on the projector's control panel and
choose the setting.
Reset Resets all adjustments values for the "Advanced1" menu
functions except for the "Rear Proj.", "Ceiling" and
"Language" settings to their default settings.
This cannot be reset to the initial setting if the "User's Logo
Protect" function of Password Protect has been set to "ON"
and "Startup Screen" is set to "OFF".
•Press the [Enter] button on the remote control or the
[Auto/Enter] button on the projector's control panel to
reset.
•Select "Reset All" to reset all menu settings – including
settings for the "Video" and "Audio" menus – to their
default settings.
Function
is finished.
p.61
p.95
User's Guide
91
Default
Network OFF
English
(Varies
depending on
country of
purchase)
-