Epson EMP-7950 User Manual page 67

Functions for Enhancing Projection
Tilt the [ ] button on the remote control to change the
2
position of the sub-screen.
Press the [E-Zoom] button on the remote control to
3
change the size of the sub-screen to one of five
available sizes.
The values given below are the ratios for the sides of the sub-
screen when the width and height of the main screen is 1.
Size 1 Size 2
Approx. Approx.
1/3.4 1/3.2
Size 2 is the default size for the sub-screen when the [PinP]
button is pressed.
Size 3 Size 4 Size 5
Approx. Approx. Approx.
1/3.0 1/2.8 1/2.7
When you press the [Enter] button, the operation
4
guide screen will disappear and the display position
and size for the sub-screen will be accepted.
When the display position and size for the sub-screen are
accepted, the operation guide disappears. To cancel the P in P
function, press the [PinP] button once more.
TIP
• The position of the sub-screen is memorised, so that the sub-screen
will appear in the last position which was set next time the P in P
function is used.
• Before setting the display position and size for the sub-screen, you
can carry out the following operations to switch the sound output
between the main screen and the sub-screen.
· To output the sound for the main screen: Press the [Color Mode]
button.
· To output the sound for the sub-screen: Press the [A/V Mute]
button.
User's Guide
66