Setting Password Protect - Epson EMP-7950 User Manual

Epson projection television user manual
Hide thumbs Also See for EMP-7950:
Table of Contents

Advertisement

Preventing theft (Password Protect)

Setting Password Protect

Use the following procedure to set Password Protect.
PROCEDURE
Press the [Freeze] button on the remote control for
1
approximately five seconds.
If using the projector's control panel, hold down the
[ ] button and press the [Menu] button for
approximately five seconds.
The Password Protect menu will be displayed.
Remote control
TIP
• If Password Protect has already been enabled, the screen requesting
a password will be displayed.
When the correct password has been entered, the "Password
Protect" menu will be displayed.
See"When Password Protect is enabled"
• When Password Protect has been set to "ON", attach the Password
Protect stickers to your preferred place on the projector to increase
anti-theft effectiveness.
Password Protect
Power ON Protect
:
ON
OFF
Password Timer
:
ON
OFF
Timer
Set 9999H
:
0H
Time-elapsed
User's Logo Protect
:
ON
OFF
Set
Passward
[
/
] :Select [
] :Set
p.58
Turn "Power ON Protect" on.
2
(1) Select "Power ON Protect", and then press the [Enter]
button on the remote control or the [Auto/Enter] button on
the projector's control panel.
(2) Select "ON", and then press the [Enter] button on the
remote control or the [Auto/Enter] button on the
projector's control panel.
(3) Press the [ESC] button on either the remote control or the
projector's control panel.
If "Password Timer" is set to "ON", "Timer" can be
3
used to specify a time limit to use the projector
without entering the password.
If you don't use this setting, proceed to step 4.
(1) Select "Timer" and then press the [Enter] button on the
remote control or the [Auto/Enter] button on the
projector's control panel.
(2) Press the [Num] button on the remote control and use the
numeric buttons to enter a setting time within the range of
1 to 9999 hours, then press the [Enter] button on the
remote control or the [Auto/Enter] button on the
projector's control panel. If you make a mistake entering
the time, press the [ESC] button on either the remote
control or the projector's control panel and re-enter the
time.
[Menu] :Exit
When you have finished using the "Password Protect"
menu, the countdown for the elapsed time will start.
User's Guide
60

Advertisement

Table of Contents
loading

This manual is also suitable for:

Emp-7900Emp-7950nl

Table of Contents