Access Lamp Statuses; Card Slot Access Lamp Status; Wireless Lan Card Access Lamp Status - Epson EMP-7950 User Manual

Inserting and Removing Cards (EMP-7950 only)

Access Lamp Statuses

Card Slot Access Lamp Status

When a memory card has been inserted into the card slot of the projector,
you can check the access status for the memory card by noting whether the
access lamp is lit and what colour it is, as described below.
Status
Green Data is being read from the memory card.
Off The memory card is in standby state.
Red An error occurred while data was being read from the memory
card.
Lit
Access status

Wireless LAN Card Access Lamp Status

The card slot access lamp does not light when a wireless LAN card has
been inserted into the projector.
You can check the network communication status by observing the status
of the wireless LAN access lamps as described below.
Off
LINK
ACT
Lamp Status
LINK Green
Green
ACT
Green
Lit
Communication status
The projector is connected to the network and
communication is possible.
Connection to a valid network is in progress.
Data is being transmitted or received.
User's Guide
19
flashing