Epson EMP-7950 User Manual page 91

Using the Configuration Menu Functions Using the Configuration Menu Functions
Sub-menu
Color Adjusts the colour temperatureg
Adjustment (red, green, blue) colour for each input source.
•Color Temp.: Lets you adjust bright colours within a range
from reddish tinges to bluish tinges.
If the colour temperature is lower, colours
appear reddish and colour tones appear
softer.
If the colour temperature is higher, colours
appear bluish and colour tones appear
sharper.
Press the [Enter] button on the remote
control or the [Auto/Enter] button on the
projector's control panel and make the
adjustment.
•RGB : Press the [Enter] button on the remote
control or the [Auto/Enter] button on the
projector's control panel, select "R" (red),
"G" (green) or "B" (blue) and make the
adjustment.
Make the adjustment while viewing the stats
of the image on the screen.
This item cannot be selected if "sRGB" has been selected as
the "Color Mode" setting in the "Video" menu.
Rear Proj. Use when projecting images from behind a translucent
screen.
When set to "ON", the projected images are horizontally
reversed.
When set to "ON", automatic keystone correction is not
carried out.
Ceiling Use when installing the projector on a ceiling.
When set to "ON", the projected images are rotated 180°
and horizontally and vertically reversed.
When set to "ON", automatic keystone correction is not
carried out.
Function
and intensity of each RGB
User's Guide
90
Default
Color Temp.:
Depends on
connection
OFF
OFF