Logging In As A System Administrator - Kyocera TASKalfa 750c Manual

3 OVERVIEW OF e-Filing WEB UTILITY
– Users can use the e-Filing web utility functions once they launch the e-Filing web utility.
– Access to the e-Filing web utility will be timed out according to the Session Timer setting in the WEB General
Setting of COMMAND CENTER.
– To use the administrator's functions of the e-Filing web utility, you must log in as a system administrator after
accessing the utility.
& P.36 "Logging in as a system administrator"
– If a guest user is enabled by user management, [Guest] is displayed on the e-Filing web page. Click [Guest] to log
in as a guest user. For the types of functions available, consult the administrator.
 Logging in as a system administrator
To log in as a system administrator, follow the steps below after launching the e-Filing web utility.
Click the Login link located at the upper right of the page.
1
The Administrator Login page is displayed.
2 Enter the administrator password in the [Password] box and click [Login].
The [Administration] tab appears in the main tabs.
– The administrator password is the same as the password that has been set in the COMMAND CENTER or
touch panel display for the administrator. The default administrator password is "123456" if you have not
changed the administrator password.
– You can log off from the e-Filing web utility in the administrator mode. To log off, click the Logout link or
close your web browser.
36 Getting Started with the e-Filing Web Utility