HP StorageWorks P9000 Manual page 30

Table 1 Business Continuity Manager Error Messages and Corresponding Troubleshooting Actions
(Message ID YK80x) (continued)
Message ID
YK9071W ISPF
YK9072W ISPF
YK9080E CON
YK9081W CON
Table 2 Business Continuity Manager Error Messages and Corresponding Troubleshooting Actions
(Message ID YKA0x)
Message ID
YKA000T TSO
YKA001E TSO
30 Messages
Message Text
A license key was not found
The license key could not be
installed.
The expiration date for your
license key (function).
Your function license will
expire in n days.
Message Text
Supplied parameters invalid
HANDLE() value not valid
Explanation and Recommended Actions
An attempt was made to install a license key, but no installation
license key was found in the license key dataset.
Make sure that none of the following conditions exist:
The license key you attempted to install was already installed.
The license key you attempted to install was not for this product.
The dataset you specified was not a license key dataset.
An attempt to install the license key has failed.
Check if one of the following conditions is applicable. If none is
applicable, make sure the key code is correct:
The license key you attempted to install was already installed.
The license key you attempted to install was not for this product.
The dataset you specified was not a license key dataset.
The license (function) has expired.
To continue using this product after the expiry date, you need a
permanent license.
If function is Basic:
A permanent license for Business Continuity Manager Basic is
required.
If function is Cnt Ac-S Z Sync Extended CTG:
A permanent license for Business Continuity Manager Extended CT
Group is required.
If function is Cnt Ac J 4x4 Extended CTG:
A permanent license for Business Continuity Manager Hitachi
Universal Replicator™ for Mainframe (Cnt Ac-J Z) 4x4 Extended
CTG is required.
The license (function) will expire in n days.
To continue using this product after the expiry date, you need a
permanent license.
If function is Basic:
A permanent license for Business Continuity Manager Basic is
required.
If function is Cnt Ac-S Z Sync Extended CTG:
A permanent license for Business Continuity Manager Extended CT
Group is required.
If function is Cnt Ac J 4x4 Extended CTG:
A permanent license for Business Continuity Manager Cnt Ac-J Z
4x4 Extended CTG is required.
Explanation and Recommended Actions
An error was detected during parameter analysis.
The handle value assigned to the HANDLE parameter is invalid.