HP StorageWorks P9000 Manual page 213

Table 55 Details of Error Codes 50xx – 6Axx (continued)
Error Error Details
Code
A path cannot be established
69F2
because there is an invalid
parameter.
The storage system serial
number is incorrect.
The SSID is incorrect.
The CU number is not
supported.
A copy pair cannot be made. The
69F3
reason might be one of the
following:
The storage system serial
number of the P-VOL is
incorrect.
The SSID of the P-VOL is
incorrect.
The CU number is not
supported.
The storage system does not
support the Open/MF
Consistency Preservation
Function.
A status cannot be changed
69F5
because the specified volume is the
S-VOL.
A suspension cannot be made. The
69F7
reason might be one of the
following:
The specified parameter is
invalid.
The storage system does not
support the Open/MF
Consistency Preservation
Function.
A suspension cannot be made
69F8
because there is an invalid
parameter.
A copy pair cannot be dissolved
69F9
because there is an invalid
parameter.
A copy pair cannot be dissolved
69FB
because the volume that received
the command is a BC Z S-VOL.
A TCA copy pair cannot be
69FC
resynchronized, suspended, or
dissolved because a volume other
than TCA has been specified.
A TCA copy pair cannot be
69FE
dissolved with Consistent specified
because the specified volume is not
the S-VOL.
Type of Error
BC Z Cnt Ac-S Z
Not output
Output
Not Output
output
Output
Output Not output
Output Not output
Output
Not output
Not output
TCA Cnt Ac-J Z CMD
Not output
Not output
Not output
Not output
Output Not output
Output Not output
Details of Error Codes
PATH Others
Output Not
output
213