HP StorageWorks P9000 Manual page 180

Table 45 Business Continuity Manager Error Messages and Corresponding Troubleshooting Actions
(Message ID YKZ41x) (continued)
Message ID
YKZ413E MSG SC=36
#1
RC=36
180 Messages
Message Text
Copygroup SUPFnc does not support
the timestamp transfer mode.
Explanation and Recommended Actions
The timestamp transfer mode cannot be used with
this storage system.
#2
Use a device that supports the timestamp transfer
mode. Also, if scanning was not performed after
the storage system microcode was replaced,
perform another scan.
SUPFnc (hexadecimal number)
Value for the version of the
storage system support function
used in the copy group
#1
If this message is output while the YKLOAD
command is being executed, the RC is 44.
#2
The timestamp transfer mode can be used for the
storage system models listed below. You cannot use
the timestamp transfer mode when using the
XP1024/XP128 disk array.
XP12000/XP10000 disk arrays
Version of the storage system support function:
X'16' or higher
XP24000/XP20000 disk arrays
Version of the storage system support function:
X'21' or higher