HP StorageWorks P9000 Manual page 222

Table 57 Details of Error Codes 8Dxx (continued)
Error Error Details
Code
The serial numbers for the primary
8D2C
and the secondary storage systems
in the host command parameter is
incorrect.
The host command parameter is
8D30
incorrect.
Multiple BC Z copy pairs cannot
8D31
be suspended because there is a
copy pair that does not allow the
status transition in the specified
copy pairs.
The command could not be
8D38
executed because the specified
volume is not in the SIMPLEX status.
A command device cannot be
8D39
defined because it differs from the
APID that was already registered.
A command device cannot be
8D3A
defined because the specified APID
is in use by another DEV.
A command device cannot be
8D3D
deleted because the specified
volume is not a command device.
A command device cannot be
8D3E
made because the specified CU
number is not supported.
The command cannot be executed
8D41
because the volume specified as
the command device is already
part of a copy pair, or is a journal
volume.
The command cannot be executed
8D42
because the volume specified as a
command device is a volume used
in the open system.
The command could not be
8D43
executed because the logical
volume of the specified volume is
blocked.
The command could not be
8D44
executed because the specified
volume has PIN data.
222 Storage System Sense Byte Information
Type of Error
BC Z Cnt Ac-S Z
Not output
Not output
Output Not output
Not output
Not output
Not output
Not output
Not output
Not output
Not output
Not output
Not output
TCA Cnt Ac-J Z CMD
Output
Output
Output
Output
Output
Output
Output
Output
Output
PATH Others
Output
Output
Not output
Not output
Not output
Not output
Not output
Not output
Not output
Not output
Not output