HP StorageWorks P9000 Manual page 214

Table 55 Details of Error Codes 50xx – 6Axx (continued)
Error Error Details
Code
A copy pair cannot be made
69FF
because the program product
necessary for the operation is not
installed.
A C/T group ID cannot be
6A00
registered because there is an
invalid parameter.
The command could not be
6A07
executed because the
corresponding volume is not the
P-VOL of a TCA copy pair or it is
a Non Gen'ed volume.
An ATTIME suspend time for TCA
6A08
cannot be set because there is a
copy pair that is not in the DUPLEX
status.
An ATTIME suspend time for TCA
6A09
cannot be set because the specified
C/T group timer type is not
System.
The command could not be
6A0F
executed because the TCA
program product is not installed.
The command could not be
6A13
executed because a remote
command was executed while the
command device was not defined.
The command could not be
6A14
executed because it was specified
to be remotely executed, but this
command cannot be executed as
a remote command.
The command could not be
6A16
executed because an instruction to
delete a command device was
issued against a volume that is not
a command device.
The command cannot be executed
6A18
because an un-implemented CU
number was specified when the
command device was defined or
deleted.
The command could not be
6A19
executed because a remote control
command has been received for a
volume that is not a command
device.
The command could not be
6A1E
executed because the APID
specified by the remote command
does not match the APID that was
already registered.
214 Storage System Sense Byte Information
Type of Error
BC Z Cnt Ac-S Z TCA
Output
Not output Output
Not output Output
Not output Output
Not output Output
Not output Output
Not output
Not output
Not output
Not output
Not output
Not output
Cnt Ac-J Z CMD PATH
Not output
Not output
Not output
Not output
Not output
Not output
Output Not output
Output Not
output
Output Not
output
Others
Output
Output
Output
Output
Output