HP StorageWorks P9000 Manual page 100

Table 24 Business Continuity Manager Error Messages and Corresponding Troubleshooting Actions
(Message ID YKU0x) (continued)
Message ID
YKU002E TSO RC=48
YKU002E MSG SC=48
YKU003E MSG SC=48
RC=48
YKU003E MSG SC=48
RC=48
YKU004E MSG SC=48
RC=48
YKU005E MSG SC=48
RC=48
YKU008E MSG SC=48
YKU008E MSG SC=48
YKU009E MSG SC=48
YKU009E MSG SC=48
YKU010E TSO RC=40
YKU050E MSG SC=36
RC=48 (attribute-value)
100 Messages
Message Text
Messages MSG(stem) does not
include trailing "."
TIMEOUT() value invalid
ATTIME Specification attime is
invalid.
SVOL(PROTECT|PERMIT) option
required
ATTIME Specification is before
current time.
ATTIME Specification is more
than 45.5 days into the future.
DEVN() not valid hex
GENID() not valid hex
Specify ATTIME() and DEVN()
parm exclusively
Specify ATTIME() and VOLUNIT
parm exclusively
REXX failure return code=nnnn
starting with variable name
Invalid Copy Group attribute
name
Explanation and Recommended Actions
The last character of the MSG parameter is not a period.
stem
Stem name assigned to the MSG
parameter
The value assigned to the TIMEOUT parameter is
invalid.
The time value assigned to the ATTIME parameter is
invalid.
For the correct format, see the description of the
YKSUSPND command in the HP StorageWorks P9000
for Business Continuity Manager Software Reference
Guide.
attime
Time value assigned to the ATTIME
parameter
Either PROTECT or PERMIT must be specified for the
SVOL parameter.
The time assigned to the ATTIME parameter is earlier
than the present time.
The time assigned to the ATTIME parameter is more
than 65,535 minutes (45.5 days) past the present time.
The value specified in the DEVN parameter is not in
hexadecimal format.
The value specified in the GENID parameter is not in
hexadecimal format.
You cannot specify the ATTIME parameter and the
DEVN parameter at the same time.
You cannot specify the ATTIME parameter and the
VOLUNIT parameter at the same time.
Access to the REXX variable identified by name failed.
For details about the return code, see IKJCT441 in the
TSO/E Programming Services.
nnnn
Error code returned upon REXX
access
The specified copy group attribute value is invalid for
this command.
Correct the value and then re-execute the command.
name
REXX variable name
attribute-value
REXX variable value