HP StorageWorks P9000 Manual page 116

Table 32 Business Continuity Manager Error Messages and Corresponding Troubleshooting Actions
(Message ID YKY3x) (continued)
Message ID
YKY500I SYS
YKY501E XML
YKY502E XML
1 16 Messages
Message Text
RESULT OF UPDATING THE
CONFIGURATION FILE: result
Disk configuration definition
error-type error. file
Configuration file DELETE error.
file
Explanation and Recommended Actions
This message indicates whether the configuration file
was successfully updated.
If the configuration file failed to be updated, see the
other error message that was output with this one and
take appropriate action.
result
Indicates the result
SUCCESS: The update succeeded.
FAILURE: The update failed.
An error occurred in the disk configuration definition
file. See the error-type, and then remove the error.
After that, retry the operation from Replication
Manager.
error-type
ALLOCATE: An allocation error
Make sure that the file indicated by file exists.
EXECIO: An input error
Make sure that the file indicated by file has not
been broken.
format: An XML format error
Make sure that the XML description does not
contain an error.
file
Name of the disk configuration
definition file in which an error
occurred
During the update process for the configuration file,
an error occurred while attempt was being made to
delete the old configuration file. Remove the error,
and then take the following action:
1. If the configuration file in which the error occurred
still exists, delete it.
2. Change the name of the temporary file to the name
indicated by file.
For details on names of temporary files, see the
chapter that explains linking with Replication
Manager in the HP StorageWorks P9000 for
Business Continuity Manager Software Installation
Guide.
3. Restart the Business Continuity Manager agent,
and then refresh the configuration file from
Replication Manager.
file
Name of the configuration file in
which an error occurred