About Your Printer's Default Settings - Epson FX-1180+ User Manual

About Your Printer's Default Settings

The default settings control many printer functions. While you
can often set these functions through your software or printer
driver, you may sometimes need to change a default setting
from the printer's control panel using the default-setting mode.
The following table shows the options available for each printer
setting. For instructions on changing the settings, see page 3-9.
Default-setting mode
Setting
Page length for front tractor
Page length for rear tractor
Skip over perforation
Auto tear-off
Auto tear off wait time*
Auto line feed
Print direction
Software
0 slash
I/F (interface) mode
Auto I/F (interface) wait time
Parallel I/F bidirectional mode**
Packet mode**
Character table
3-4
Using the Control Panel
Options
Length in inches: 3, 3.5, 4, 5.5, 6, 7, 8, 8.5, 11,
70/6, 12, 14, 17
Length in inches: 3, 3.5, 4, 5.5, 6, 7, 8, 8.5, 11,
70/6, 12, 14, 17
Off, On
Off, On
0.5 second, 1 second, 2 seconds, Others
Off, On
Bi-D, Uni-D
ESC/P, IBM PPDS (same as IBM 2380 Plus),
OKI ML 320T*
0 /
0,
Auto, Parallel, USB, Option
10 seconds, 30 seconds
Off, On
Off, Auto
Standard model: italic, PC 437, PC 850,
PC 860, PC 863, PC 865, PC 861, BRASCII,
Abicomp, Roman 8, ISO Latin 1, PC858,
ISO 8859-15
All other models: Italic, PC 437, PC 850,
PC 437 Greek, PC 853, PC855, PC 852,
PC 857, PC 866, PC 869, MAZOWIA,
Code MJK, ISO 8859-7, Bulgaria, PC 774,
Estonia, PC 866 LAT., ISO 8859-2, PC 866 UKR,
PC-APTEC, PC-771, PC-AR864, PC 708,
PC 720