Power Supply Problems - Epson FX-1180+ User Manual

You can also use the self test to determine whether the printer or the
computer is causing the problem. See "Printing a Self Test" on
page 4-17 for instructions. To pinpoint communication problems,
experienced users may want to use the printer's hex dump mode,
described in "Printing a Hex Dump" on page 4-18.
To clear a paper jam, see "Clearing Paper Jams" on page 4-15.

Power supply problems

The control panel lights come on briefly, but then go off and
stay off.
Cause
The printer's voltage rating
does not match the voltage
of your electrical outlet.
w
Warning:
Do not reconnect the power cord to an electrical outlet that has the
wrong voltage for your printer.
The printer does not work and the control panel lights are off
even when you turn on the printer.
Cause
The power cord is not
properly plugged into the
electrical outlet or your
printer.
The electrical outlet does not
work.
What to do
Check the printer and the outlet
voltage ratings. If the voltages do not
match, unplug the printer
immediately and contact your dealer.
What to do
Turn off the printer, and make sure
the power cord is firmly plugged into
the electrical outlet (and the printer, if
necessary). Then turn on the printer.
Use a different outlet.
Troubleshooting
4-3