Epson FX-1180+ User Manual page 69

The printer does not fully eject a single sheet.
Cause
Paper is too long.
The paper does not feed properly with the optional cut-sheet
feeder.
Cause
The cut-sheet feeder is not
installed properly.
Too many sheets are loaded
in the cut-sheet feeder. You
cannot load more than 150
sheets of paper in the
high-capacity cut-sheet
feeder.
The edge guides of the
cut-sheet feeder are not
positioned correctly.
There is only one sheet left
in the bin.
What to do
Press the Load/Eject button to eject
the sheet. Make sure the page length
of your paper is within the range
specified for single-sheet paper. Also
check and adjust the paper size
setting in your application or printer
driver.
What to do
Reinstall it as described in the online
Reference Guide.
Load less than 150 sheets of paper.
See the online Reference Guide for
more information.
Align the left edge guide with the
arrow mark, then move the right edge
guide to match your paper's width.
Add more paper to the cut-sheet
feeder.
Troubleshooting
4-5