For Dos Programs - Epson FX-1180+ User Manual

For DOS programs

To control the printer from DOS application programs, you need
to select the printer you are using or another available printer
from the printer list in your application.
Choose the EPSON printer at the appropriate step in the
installation or setup procedure. If the list in your application
does not include your printer, choose the first available printer
from the following list:
For FX-880+:
FX-880
FX-870
FX-850
FX-800
FX-85
FX-80+
FX-80
If none of these printers is listed, choose the first one available
from the following:
FX
LX
RX
MX
EPSON printer
Standard printer
Draft printer
ASCII printer
Note:
If your application does not list a suitable alternative, contact the
software manufacturer to see if an update is available.
1-14
Setting Up the Printer
For FX-1180+:
FX-1180
FX-1170
FX-1050
FX-1000
FX-105
FX-100+
FX-100