Switching To Printing On Single Sheets - Epson FX-1180+ User Manual

Switching to printing on single sheets

Follow the steps below to switch from printing on continuous
paper from a push tractor to printing on single sheets.
Note:
If continuous labels are loaded in the printer, remove them before
switching to single-sheet printing. See "Removing continuous paper
with labels" on page 2-24 for more information.
If the tractor is in the pull position, remove any continuous paper from
it before switching to single-sheet printing. See "Removing paper from
the pull tractor" on page 2-13 for more information.
1. If any printed pages remain in the printer, press the
Tear Off/Bin button to advance the paper to the tear-off
position. Then tear off the printed pages.
c
Caution:
Make sure you tear off your printed document before you
press the Load/Eject button in the next step. Reverse
feeding several pages at a time may cause a paper jam.
2. Press the Load/Eject button to feed the continuous paper
backward to the standby position. The paper is still attached
to the push tractor but is no longer in the paper path.
3. Lower the continuous paper support on the paper guide
until it clicks into place, then move the paper guide to the
upright position.
4. Set the paper release lever to the single-sheet
position.
5. Load single sheets as described in "Loading
Single Sheets with the Paper Guide" on page 2-13.
2-26
Paper Handling