For Windows - Epson FX-1180+ User Manual

For Windows

Follow the steps below to install the printer software in
Windows Me, 98, 95, 2000, or NT 4.0.
Note:
❏ Installing the printer software for Windows 2000 or NT 4.0 may
require administrator privileges. If you have problems, ask your
administrator for more information.
❏ If you want to make a floppy disk version of the printer software on
your CD-ROM, insert the CD and run SETUP.EXE. In the
dialog box that appears, double-click Create Floppy based
printer driver/utility disks and follow the on-screen instructions.
❏ If you are using the floppy disk version of the EPSON software,
make a backup copy of the EPSON printer software disk or disks
before you begin installation.
❏ If the New Hardware Found screen or any other wizard appears
when you turn on your computer, click Cancel.
❏ If the Digital Signature Not Found screen appears, click Yes. If
you click No, you must reinstall the printer driver.
1. Make sure Windows Me, 98, 95, 2000, or NT 4.0 is running
and the printer is turned off.
2. Insert the printer software CD-ROM into the CD-ROM
drive. The Install dialog box appears. If it does not,
double-click the
icon, then double-click SETUP.EXE.
(If you are using a floppy disk, insert the disk into the floppy
disk drive. Double-click the floppy disk drive icon and then
double-click the FD_SETUP.EXE icon.)
3. Click Install to start the printer software installation.
4. Select your printer from the list, then follow the instructions
on the screen.
My Computer icon. Click the CD-ROM
Setting Up the Printer
1-13