Epson STYLUS NX100/NX105/SX100/SX105/TX100/TX101/TX102/TX103/TX105/TX106/TX109/ME 300
Install the Document Pad following the procedure below.
1. Place the Document Pad with the side where the double-sided
tape attached upward on the Rod Lens Array aligning its
corner with the home position.
2. Close the Document Cover to attach the Document Pad.
Document Cover
Document Pad
Figure 4-7. Document Pad Position
DISASSEMBLY/ASSEMBLY
Standard line
Home position
Double-sided tape position
Removing the Housing
4.3.4 Scanner Stand /Cover Wire
Parts/Components need to be removed in advance:
None
Removal procedure
Scanner Stand
1.
Open the Scanner Unit.
2.
Release the hooks (x2) at the lower part of the Scanner Stand.
Be careful not to lose the Scanner Stand Spring when removing the
Scanner Stand.
3.
Release the guide pins (x2) at the upper part of the Scanner Stand, and remove
the Scanner Stand.
Scanner Stand Spring
Figure 4-8. Removing the Scanner Stand
Revision A
Scanner Unit
Scanner Stand
Guide pins
Hook
60
Confidential