Stand-Alone Copy Function; Supported Paper And Copy Mode; Setting For Stand-Alone Copy - Epson Stylus NX105 Service Manual

Color inkjet printer
Hide thumbs Also See for Stylus NX105:
Table of Contents

Advertisement

Epson STYLUS NX100/NX105/SX100/SX105/TX100/TX101/TX102/TX103/TX105/TX106/TX109/ME 300

1.7 Stand-alone Copy Function

1.7.1 Supported Paper and Copy Mode

Table 1-18. Supported Paper and Copy Mode
Print
Paper Type
Size
Quality
Plain paper
Draft
A4,
Letter
Standard
Photo Paper
4" x 6"
Standard

1.7.2 Setting for Stand-alone Copy

You can make settings by a specific key operation to select color copy, B&W copy, or
photo copy. Refer to
Table 1-16
for key operation methods.
Table 1-19. Settings for Stand--alone Copy
Settings
Copy type
Select from color copy, B&W copy or photo copy by a key operation.
Layout
• Color Copy, B&W Copy
Normal layout with 3mm margins
• Photo Copy
Borderless (The area size of projections: Fixed to Maximum.)
Print
Paper type
setting
Paper size
Refer to
Table
1-18.
Quality
When "Fit to Page" is selected by the key operation, a copy is made
adjusting the image size to the paper by enlarging/reducing the
original. The zoom ratio is determined as follows, and the same ratio is
applied to both horizontal and vertical sides.
• Detects the image size of the original using the preview function.
• Calculates an appropriate zoom ratio from the image size and the
Fit to Page
printable area of the paper.
• If the ratio falls into less than 25%, 25% is applied. 400% is applied
if over 400% likewise.
• For color/B&W copying, the zoom ratio is determined so as to
make a copy of the whole image of the original on the paper.
• For photo copying, the zoom ratio is determined so as not to leave
any margins on the paper.
PRODUCT DESCRIPTION
Resolu-
Dot
Micro
Border-
Bi-D
tion
Size
Weave
360x120
Eco
ON
OFF
360x360
VSD1
ON
OFF
1440x720 VSD3
ON
ON
Function
Stand-alone Copy Function
1.7.2.1 Relation Between Original and Copy
The scanning start position is located on the front right of the scan bed. The relations
between the original placed face down and its copy are as follows.
Standard copy
Readable Length
less
NA
A
NA
B
OK
C
Home position
D
E
F
BM
Paper Length
Figure 1-6. Relation Between Original and Copy (Borderless/With Borders)
Original Document
A
Scan bed
B
Scan area
C
Original (face down)
OTM
Top margin (out of scan range)
OLM
Left margin (out of scan range)
Copied Document
D
Copied paper
E
Print area
F
Copy
LM, RM
Left margin, Right margin
TM, BM
Top margin, Bottom margin*
Borderless copy
OTM
Readable Length
Readable
Width
OLM
OLM
Home position
LM
LM
Paper
Width
RM
RM
TM
BM
Paper Length
Scan / Print direction
" 1-9 Scanning Range " (p.14)
" 1-9 Scanning Range " (p.14)
" 1-9 Scanning Range " (p.14)
" 1-7 Printing Area (Margins) " (p.14)
" 1-7 Printing Area (Margins) " (p.14)
Revision A
OTM
A
B
C
E
D
F
TM
---
---
---
---
21
Confidential

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents