Middle Housing - Epson Stylus NX105 Service Manual

Epson STYLUS NX100/NX105/SX100/SX105/TX100/TX101/TX102/TX103/TX105/TX106/TX109/ME 300

4.3.6 Middle Housing

Parts/Components need to be removed in advance:
Scanner Stand/Cover Wire(p 60), Scanner Unit
Removal procedure
1. Remove the six screws.
Rear Side
Lower Housing
Figure 4-14. Removing the Middle Housing (1)
DISASSEMBLY/ASSEMBLY
(p 62), Panel Unit (p 64)
Hook
Middle Housing
SCREW M3x10 P-TITE (5±0.5kgfcm)
Removing the Housing
2. Release the two hooks on the left, two hooks on the right, and the hook on the
rear (see Fig.4-14
), then remove the Middle Housing from the Lower Housing.
Left Side
Right Side
Figure 4-15. Removing the Middle Housing (2)
When installing the Middle Housing, first align the hook A on the
front left, and then attach the housing. (See Fig.4-15.)
Revision A
Hook A
Hook
Hook
63
Confidential