Head Angular Adjustment; Bi-D Adjustment - Epson Stylus NX105 Service Manual

Epson STYLUS NX100/NX105/SX100/SX105/TX100/TX101/TX102/TX103/TX105/TX106/TX109/ME 300

5.2.3 Head Angular Adjustment

The following pattern is printed.
1 2 3
Figure 5-3. Head angular adjustment Pattern Printing
How to Judge
Examine the printout patterns, and enter the value for the pattern without any gap or
overlap.
Additional Information
If there is no OK pattern printed, enter the value for the best one, and print the
adjustment pattern again.
Example for judgement
Overlap
NG
ADJUSTMENT
4 5 6
Gap
OK NG
Using the Adjustment Program (TBD)

5.2.4 Bi-D Adjustment

The following pattern is printed for each of the four print modes (four dot size modes).
7
2
1 3
Figure 5-4. Bi-D Adjustment Printout Pattern
How to Judge
Examine the printout patterns for each of the four modes, and enter the value for the
pattern without any gap or overlap for each mode.
Additional Information
If there is no OK pattern printed, enter the value for the best one, and print the
adjustment pattern again.
Example for judgement
4
7
5
6
Overlap
Gap
NG OK NG
Revision A
8 9
106
Confidential