Epson Stylus NX105 Service Manual page 20

Epson STYLUS NX100/NX105/SX100/SX105/TX100/TX101/TX102/TX103/TX105/TX106/TX109/ME 300
Printer Status
Power OFF (processing)
Fatal error (system error)
Fatal error (mechanical error)
Maintenance request
(Waste ink overflow)
Power ON (initializing)
Paper jam error
Multi-feed error
Ink out error / No ink cartridge error
Ink cartridge detection error
Ink cartridge replacement is in progress
Ink sequence is in progress
No paper error
Copying
Printing from PC
Scanner operation from PC
Power ON (Print data processing)
Ink low
Power ON (normal idle state)
Power ON (Sleep)
Printing & job being canceled
Note : --- : No change
Flashing : Repeats ON and OFF every 1.25 seconds.
Flashing 2 : Repeats ON for 0.5 second, OFF for 0.5 second, ON for 0.5 second, and OFF for 1.0 second.
High-speed flashing : Repeats ON and OFF every 0.5 second.
Low-speed flashing : Repeats ON and OFF every 2 seconds.
Note : See " 3.2 Error Indications and Fault Occurrence Causes " (p.29)
PRODUCT DESCRIPTION
Table 1-17. LED Functions
Power LED
High-speed flashing
High-speed flashing High-speed flashing
Flashing
Flashing
Flashing
---
---
---
Flashing 2
Flashing
---
Flashing
Flashing
Flashing
Flashing
---
ON
Low-speed flashing
Flashing
for remedies for errors.
Control Panel
LED
Paper LED Ink LED
OFF
High-speed flashing
Flashing Flashing
ON
---
Flashing
Flashing
OFF
OFF Flashing 2
---
ON
---
---
---
---
--- Flashing
---
OFF
---
Revision A
Priority
OFF 1
2
3
ON 4
--- 5
OFF 6
OFF 7
ON 8
9
--- 10
OFF 11
--- 12
--- 13
--- 14
--- 15
16
--- 17
OFF -
--- -
20
Confidential