Epson Stylus NX105 Service Manual page 69

Epson STYLUS NX100/NX105/SX100/SX105/TX100/TX101/TX102/TX103/TX105/TX106/TX109/ME 300
4. Release the two hooks on both sides of the Carriage with a flathead precision
screwdriver or a similar tool, and remove the Holder Contact Assy upward as
shown below.
Holder Contact Assy
Figure 4-29. Removing the Printhead (4)
DISASSEMBLY/ASSEMBLY
Hook
Holder Contact Assy
Disassembling the Printer Mechanism
5. Release the hook, and remove the FFC Cover.
hook
Figure 4-30. Removing the Printhead (5)
Be careful not to touch the nozzles with bare hands or damage the
ink supply needles of the Printhead.
6. Remove the three screws that secure the Printhead, and lift the Printhead with
longnose pliers.
Head FFC SCREW P-TIGHT M2.6x8 BIND (4±0.25kgfcm)
Figure 4-31. Removing the Printhead (6)
Revision A
FFC Cover
Rib
Printhead
69
Confidential