Epson Stylus NX105 Service Manual page 19

Epson STYLUS NX100/NX105/SX100/SX105/TX100/TX101/TX102/TX103/TX105/TX106/TX109/ME 300
Button
Start Color *3
(when pressed for 3 seconds or more)
Stop + Start B&W
Stop + Start Color
Start Photo + Start B&W
Start Photo + Start Color
Note *1: If the stop button is pressed when the power LED begins to flash, the nozzle check function becomes available.
(This function becomes available if the stop button is pressed at the above timing regardless of whether the power button is being pressed or not.)
*2: The nozzle check pattern is as follows. Numbers in the figure indicate nozzle numbers. In actual check patterns, the version of firmware is also printed.
(Nozzle numbers and color names are not printed.)
1
Black
31
61
Nozzle check pattern
*3: When displaying a paper out error
When displaying a paper jam error
PRODUCT DESCRIPTION
Table 1-16. Buttons Functions
Printer Status
Ready / Ink Low Adjust the size to the paper and starts color copying.
Sleep Recovers from sleep, adjust the size to the paper and starts color copying.
Ready / Ink Low Starts B&W copying in the draft mode.
Sleep Recovers from sleep and starts B&W copying in the draft mode.
Ready / Ink Low Starts color copying in the draft mode.
Sleep Recovers from sleep and starts color copying in the draft mode.
Ready / Ink Low Makes 20 copies in B&W copying.
Sleep Recovers from sleep and makes 20 copies in B&W copying.
Ready / Ink Low Makes 20 copies in color copying.
Sleep Recovers from sleep and makes 20 copies in color copying.
1
Yellow
29
30
1
Magenta
29
60
1
Cyan
29
90
: If the paper feeding finishes successfully, cancels the error and continues the procedure.
: If the paper ejection finishes successfully, cancels the error and continues the procedure.
360 dpi VSD1(Large) dot
8 dots
Control Panel
Functions
0.212 mm (1/120 inch)
Revision A
19
Confidential