Executing Program; Displaying Performance Measurement Data - Fujitsu SOFTUNE User Manual

CHAPTER2 Dependence Functions
■ Setting Events
Set events using the SET EVENT command.
The starting/ending point of time measurement and points to measure pass count are specified by events.
Events at 4 points (1 to 4) can be set. However, in the performance measurement, the intervals, starting
event number and ending event number are fixed in the following combination.
- Measuring Time
Two intervals have the following fixed event number combination.
- Measuring Count
The specified events become performance measurement points automatically.

■ Executing Program

Start measuring when executing a program by using the GO or CALL command. If a break occurs during
interval time measurement, the data for this specific interval is discarded.

■ Displaying Performance Measurement Data

Display performance measurement data by using the SHOW PERFORMANCE command.
■ Clearing Performance Measurement Data
Clear performance measurement data by using the CLEAR PERFORMANCE command.
[Example]
>CLEAR PERFORMANC
>
138
Interval Starting Event Number
1 1
2 3
Ending Even Number
2
4