Cache Flush Control - Fujitsu SOFTUNE User Manual

2.2.1.3

Cache Flush Control

This section explains cache flush setup.
■ Cache Flush Control
When using a chip with cache memory, rewriting the memory and software break point setup using
commands is not reflected in the cache.
commands are executed.
automatically, monitor memory rewriting, and set software break points, etc.
This function is controlled using the [Emulation] tab in debug environment setting dialog.
Note:
When the automatic cache flushing option is enabled, it may negatively affect the program speed.
Therefore, cache flushing must be performed when such
The emulator debugger (MB2197) has a function to flush the cache
CHAPTER2 Dependence Functions
69