Break - Fujitsu SOFTUNE User Manual

CHAPTER2 Dependence Functions
2.3.4

Break

The emulator debugger (MB2198) provides nine types of break functions. When by each
break function aborts program execution, the address where a break occurred and the
break factor are displayed.
■ Break Functions
The emulator debugger (MB2198) provides the following nine types of break functions;
- Code break
- Data break
- Code event break
- Data event break
- Trace buffer-full break
- Alignment error break
- External trigger break
- Forced break
- Data watch break
Available break functions depend on the DSU, adapter board, and chip.
Table 2.3-3 Available Break Functions
Code break (software)
Code break (hardware)
Code break (hardware/count)
Data break
Code event break
Data event break
Trace buffer-full break
Alignment error break
External trigger break
Forced break
Datawatch break (hardware)
Datawatch break (software)
*: FR60Lite does not support these functions because they are enhanced by "Code Break (Hardware/
count)", "Sequencer (31evels+restart)", and "Trace Trigger".
110
DSU Adapter FR60Lite
❍ ❍
❍ ❍
✕ ✕
✕ ✕
❍ ❍
❍ ❍
❍ ❍
❍ ❍
❍ ❍
❍ ❍
✕ ✕
❍ ❍
FR80S
❍ ❍
❍ ❍
❍ ❍
❍ ❍
✕ ✕
*
✕ ✕
*
❍ ❍
❍ ❍
❍ ❍
❍ ❍
❍ ✕
❍ ❍