2.3.1.3
Cache Flush Control
This section explains cache flush setup.
■ Cache Flush Control
When using a chip with cache memory, rewriting the memory and software break point setup using
commands is not reflected in the cache.
commands are executed. The debugger has a function to flush the cache automatically, monitor memory
rewriting, and set software break points, etc.
This function is controlled using the [Emulation] tab in debug environment setting dialog.
Note:
When the automatic cache flushing option is enabled, it may negatively affect the program speed.
CHAPTER2 Dependence Functions
Therefore, cache flushing must be performed when such
103