Display Format Of Trace Data - Fujitsu SOFTUNE User Manual

CHAPTER2 Dependence Functions
2.3.7.1

Display Format of Trace Data

There are three formats for displaying trace buffer data.
■ Display Format of Trace Data
• Display Only Instruction Operation:
• Display Bus Cycles:
• Display by Unit of Source Lines:
■ Display Only Instruction Operation
In this mode, the instruction operation is displayed in disassembly units.
■ Display Bus Cycles
In this mode, detailed information on all sampled instruction fetch cycles and data access cycles is
displayed.
■ Display by Unit of Source Lines
This mode only displays source lines.
132
Specify Instruction
Specify RAW data
Specify Source