To Interrupt The Program Execution [Break] - Fujitsu SOFTUNE User Manual

CHAPTER2 Dependence Functions
2.4.6

To Interrupt the Program Execution [Break]

This section describes the method of interrupting the execution of the user program.
■ Break Functions
The function to interrupt the execution of the user program is called a break function.
The emulator debugger (MB2100-01) provides the following eight types of break functions;
• Code break (hardware)
• Code break (software)
• Data break
• Trace trigger break
• Forced break
• Data watch break
• Sequencer
• Guarded access break
When by each break function aborts program execution, the address where a break occurred and the break
factor are displayed.
170