Setting/Release Of Debug Functions - Fujitsu SOFTUNE User Manual

2.4.4.1

Setting/Release of Debug Functions

The debug function is set or can be released while executing the user program.
■ Commands Available during Execution of User Program
A specific debug feature can setting/be released while executing the user program in the emulator debugger
(MB2100-01). Either the dialog or the command can setting/be released.
Table 2.4-1 shows the commands available during execution of user program. For more details, refer to
"● Debugger" in "SOFTUNE Workbench Command Reference Manual".
Table 2.4-1 Commands Available during Execution of User Program (1 / 2)
Reset MCU
Memory operation (read/write)
Line assemble/disassemble
Set/delete breakpoint
Set/delete sequencer
Set/delete trace trigger
Function
CHAPTER2 Dependence Functions
Major Command name
1.3 RESET
5.1 EXAMINE
5.2 ENTER
5.3 SET MEMORY
5.4 SHOW MEMORY
5.5 SEARCH MEMORY
5.8 COMPARE
5.9 FILL
5.10 MOVE
5.11 DUMP
6.1 ASSEMBLE
6.2 DISASSEMBLE
3.1 SET BREAK (type1)
3.3 SET BREAK (type3)
3.6 CANCEL BREAK
3.7 ENABLE BREAK
3.8 DISABLE BREAK
3.10 SET DATABREAK (type2)
3.12 CANCEL DATABREAK
3.13 ENABLE DATABREAK
3.14 DISABLE DATABREAK
3.15 SET EVENT
3.17 CANCEL EVENT
3.31 SET SEQUENCE (type2)
3.33 CANCEL SEQUENCE
3.34 ENABLE SEQUENCE
3.35 DISABLE SEQUENCE
4.28 SET TRACETRIGGER
4.30 CANCEL TRACETRIGGER
4.31 ENABLE TRACETRIGGER
4.32 DISABLE TRACETRIGGER
*1
161