Inaccessible Area - Fujitsu SOFTUNE User Manual

CHAPTER2 Dependence Functions
2.5.4

Inaccessible Area

This section explains inaccessible area by the monitor debugger.
■ Inaccessible area
The inaccessible area is a function that suppresses access to memory when the debugger accesses a
specified memory area (using commands, windows, etc.*).
However, access to memory is not suppressed using program.
The following commands are used to set an inaccessible area.
SET MAP/INACCESSIBLE:
SHOW MAP/INACCESSIBLE:
CANCEL MAP/INACCESSIBLE:
ENABLE MAP/INACCESSIBLE:
DISABLE MAP/INACCESSIBLE:
*: Memory operation command
Assemble/disassemble command
Load/save command
Built-in Variables and Functions (%BIT, %B, %H, %W, %L, %S, %D)
Formula
Vector
Memory window
Source window
Assemble window
Watch window
Local window
Symbol window
■ Access to memory area including inaccessible area
When there are inaccessible regions within those that are accessed, up to memory of inaccessible region is
accessed, an error is output when the inaccessible region is reached, and access to the memory is
suspended.
214
Sets an inaccessible region.
Displays an inaccessible region.
Deletes a specified inaccessible region.
Enables a specified inaccessible region.
Disables a specified inaccessible region.