To Interrupt The Program Execution [Break] - Fujitsu SOFTUNE F2 MC-16 User Manual

2.6.6

To Interrupt the Program Execution [Break]

This section describes the method of interrupting the execution of the user program in
the MB2100-01 emulator debugger.
■ Break Functions
The function to interrupt the execution of the user program is called a break function.
This Emulator debugger provides the following seven types of break functions;
• Code break (hardware)
• Code break (hardware/count)
• Code break (software)
• Data break
• Forced break
• Data watch break
• Sequencer
When by each break function aborts program execution, the address where a break occurred and the break
factor are displayed.
CHAPTER 2 DEPENDENCE FUNCTIONS
293