Bosch HES3052U-01 Use And Care Manual page 15

Electric free-standing range with mechanical controls
Hide thumbs Also See for HES3052U-01:
Table of Contents

Advertisement

Available languages

Available languages

Changing temperature during cook-
ing
Turning off the oven
Hot Oven Indicator
Using the Timer
1.
Press BAKE or BROIL.
Operation - Oven
The selected mode appears in the display and
the default temperature flashes.
2.
To select a different temperature, turn knob to the right or left (in 5° incre-
ments) to desired temperature.
Note: To select the warm or proof functions, turn the knob to the left past 200
degrees.
3.
Press START.
The display alternates between the cooking mode and preheat. The preheated
temperature is displayed, starting at 100°F. The actual temperature increases
until set temperature is reached, at which point the oven will beep.
1.
Press BAKE or BROIL.
2.
Turn the knob to select new temperature
3.
Press START.
1.
Press OFF.
After the oven has been turned off, HOT appears in the display where the cooking
mode was to indicate that the oven is off but still hot. When the oven temperature
drops below 176 ° F, HOT is no longer seen in the display.
Notes:
If you do not finish setting the timer, the oven will beep periodically as a
reminder to set the time. Press OFF to exit the TIMER mode. (Selecting OFF
when not setting the timer will turn the oven off.)
Turn the knob to display the time of day or further information about the oven
mode when the timers are in use.
To set the timer:
1.
Press TIME and TIMER 1 will flash in display.
Changing the Timer/s
,
,
4.
5.
6.
,
2.
3.
4.
5.
Turn clockwise and TIMER 2 will be displayed.
Select TIMER 1 or 2, then press TIME. SET
TIMER 1 (2) appears in display. Minutes flash.
Turn knob to set minutes. If setting only minutes,
press START. Otherwise, continue to step 3.
Press TIME again and the hours will flash.
Turn knob to set hours.
Press TIME again. The TIMER is now set.
If TIME or START is not pressed, oven will begin beeping and timer display
will begin flashing.
Press TIME. TIMER 1 will appear in display.
Select either TIMER 1 or 2.
Press TIME. RESET TIMER 1 (2) appears in
the display. Minute digits flash.
Turn knob clockwise or counterclockwise
to change minutes.
Press TIME again and hour digits will flash.
Turn knob clockwise or counterclockwise
to change hours.
English 13

Advertisement

Table of Contents
loading

Table of Contents