[Report Settings] - Konica Minolta bizhub C754 User Manual

Settings
[Output Method]
[Forward Dest.]
[Select Line]

[Report Settings]

To display: [Utility] - [Administrator Settings] - [Fax Settings] - [Report Settings]
Specify the conditions for printing fax-related reports.
Settings
[Activity Report]
[ON]/[OFF]
[Output Setting]
[Remark Column Print
Setup]
[TX Result Report]
[Sequential TX Report]
[Timer Reservation TX Re-
port]
[Confidential Rx Report]
[Bulletin TX Report]
bizhub C754/C654
Description
Select whether to print a received fax on this machine when forwarding it.
• [Forward & Print]: Prints a received fax on this machine when forward-
ing it.
• [Forward & Print (If TX Fails)]: Prints a received fax on this machine only
when forwarding has failed.
[Forward & Print (If TX Fails)] is specified by default.
Specify a destination where to forward a received fax.
Directly enter the appropriate fax number using the Keypad, or tap [Select
from Address Book] and select one of the destinations registered on this
machine.
You can specify [File Type] and convert a fax into a file except when the
destination is a fax machine.
If two lines are used, select the line used to send a fax. If [No Selection] is
selected, either line, whichever is not busy, is used for transmission.
[No Selection] is selected by default.
Description
Set the printing conditions for a report containing results of faxes sent and
received.
Specify whether to print an activity report.
[ON] is selected by default.
To print it, select when to print it.
• [Daily]: Prints an activity report at the time specified in [Output Time
Settings] every day.
• [Every 100 Comm.]: Prints an activity report every 100 communica-
tions.
• [100/ Daily]: Prints an activity report at the time specified in [Output
Time Settings] every day. In addition, a report is printed for every
100 communications.
[Every 100 Comm.] is specified by default.
Specify whether to print user or account name in the remarks column of
the activity report if user authentication or account track is enabled on this
machine.
• [Normal Printing]: Prints the line status or sending settings.
• [User Name Printing]: Prints the user name for user authentication.
• [Account Name Printing]: Prints the account name for account track.
[Normal Printing] is specified by default.
Select when to print a report containing the results of fax transmission.
• [ON]: The report is printed every time a fax has been transmitted.
• [If TX Fails]: The report is printed if a fax transmission has failed.
• [OFF]: The report is not printed.
[If TX Fails] is specified by default.
Select whether to print a report containing results of faxes sent by polling
and broadcast.
[ON] is selected by default.
Select whether to print a report when transmission is reserved using the
Timer TX function.
[ON] is selected by default.
Select whether to print a report containing the results of confidential faxes
received.
[ON] is selected by default.
Select whether to print a report containing records of faxes registered with
the bulletin for being received by polling.
[ON] is selected by default.
7
7-23