[Line Parameter Setting]; [Number Of Redials]; [Redial Interval]; [Tx/Rx Settings] - Konica Minolta bizhub C754 User Manual

Settings
[OFF]

[Line Parameter Setting]

To display: [Utility] - [Administrator Settings] - [Fax Settings] - [Line Parameter Setting]
Configure the environment to use fax functions on this machine, such as the types of telephone lines (dialing
method) and fax receive mode.
Settings
[Dialing Method]
[Receive Mode]
[Number of RX Call Rings]

[Number of Redials]

[Redial Interval]

[Line Monitor Sound]
[Line Monitor Sound Vol-
ume (Send)]
[Line Monitor Sound Vol-
ume (Receive)]
[Number of Redials]
To display: [Utility] - [Administrator Settings] - [Fax Settings] - [Line Parameter Setting] - [Number of Redials]
If the machine fails to send a fax successfully, it automatically redials the same destination after the elapse
of a certain period of time. If necessary, change the number of redials.
(The setting range varies according to the local standards.)
[Redial Interval]
To display: [Utility] - [Administrator Settings] - [Fax Settings] - [Line Parameter Setting] - [Redial Interval]
If necessary, change the redial intervals when you specified a value in [Number of Redials].
[3 min.] minutes is selected by default.

[TX/RX Settings]

To display: [Utility] - [Administrator Settings] - [Fax Settings] - [TX/RX Settings]
Specify how to print faxes received and how to handle files in a polling transmission.
Settings
[Duplex Print (RX)]
[Letter/Ledger over A4/A3]
[Print Paper Selection]
[Print Paper Size]
[Incorrect User Box No. En-
try]
bizhub C754/C654
Description
Prints no Footer Position.
[OFF] is specified by default.
Description
Select the line type according to your environment.
Select a receive mode.
If necessary, change the number of times the phone rings before automat-
ically receiving a fax.
If the machine fails to send a fax successfully, it automatically redials the
same destination after the elapse of a certain period of time. If necessary,
change the number of redials. (The setting range varies depending on the
local standards.)
If necessary, change the redial intervals when you specified a value in
[Number of Redials].
Select whether to play sounds on the telephone line from speakers during
fax communication.
If necessary, adjust the speaker volume for sending when [Line Monitor
Sound] is set to [ON].
If necessary, adjust the speaker volume for receiving when [Line Monitor
Sound] is set to [ON].
Description
Select whether to print an original on both sides of sheets of paper when a
fax having multiple pages is received.
Select whether to preferentially print an original on inch-sized paper when
a fax is received.
Select the criterion of selecting paper for printing a fax.
Select the paper size to print received faxes on.
Select the action taken by the machine if an unregistered user box is spec-
ified for receiving a fax using the machine's box.
7
7-19