Administrator Setting >> Fax Setting >> Pbx Cn Set; Administrator Setting >> Fax Setting >> Report Settings - Konica Minolta bizhub 600 User Manual

11
11.2.10Administrator Setting >> Fax Setting >> PBX CN Set
Sets the connection method of the PBX line. (page 11-50)
Item
PBX CN Set
11.2.11Administrator Setting >> Fax Setting >> Report Settings
Sets the method to print a report. (page 11-52)
Item
Activity Report
TX Report
Sequential TX
Report
Timer Reserva-
tion TX Report
Confidential RX
Report
Bulletin TX Re-
port
Broadcast Re-
sult Report
TX Result Re-
port Check
*
indicates factory default setting.
11-10
Description
Select ON when your FK-502 is connected
to PBX line.
When PBX connection mode is set at ON,
this parameter determines the outside line
access code. The external line access code
is the prefix attached to the telephone
number when dialing to an external line.
This prefix will be dialed when external line
option is selected with abbreviated dial
number or Program.
Description
Determines whether to print the report and
the timing at which the report will be printed
out.
Set up the Broadcast Result Report printing
method.
Determines whether to display the trans-
mission result report select screen. If you
select "ON", it will be displayed after each
transmission.
Utility Mode
Available value
*
ON / OFF
When set to ON, the
number is of the outside
line.
Available value
OFF / Daily / Every 100
*
Comm. / 100/Daily
*
ON / If TX Fails / OFF
*
ON / OFF
*
ON / OFF
*
ON / OFF
*
ON / OFF
*
All Dest. /1 Dest. at a
time
*
OFF / ON
bizhub 750/600