Specifying The Original Loading Direction ([Original Direction]); Specifying The Original Binding Position ([Binding Position]); Scanning While Removing Dust From The Slit Glass ([Despeckle]); Skipping Blank Pages ([Blank - Konica Minolta bizhub C754 User Manual

1.4 Option settings for fax transmission

Specifying the original loading direction ([Original Direction])

When scanning a 2-sided original etc., you can specify the direction in which the original is loaded so that
the vertical direction is set correctly.
For details, refer to page 5-13.

Specifying the original binding position ([Binding Position])

When scanning a 2-sided original, specify the original binding position in [Binding Position] to prevent the
binding positions from being reversed between the front and rear faces.
For details, refer to page 5-13.

Scanning while removing dust from the slit glass ([Despeckle])

When scanning an original in ADF, scanning of the original(s) and removal of dust from the Slit Scan Glass
are performed alternately, so that the original is always scanned using clean Slit Scan Glass.
It takes longer to finish scanning, compared to the normal operation.
For details, refer to page 5-13.
Skipping blank pages ([Blank Page Removal])
Blank pages contained in the original loaded into the ADF are skipped when the original is scanned.
For details, refer to page 5-13.
bizhub C754/C654
1
1-20