Setting Up For Ip Address Fax (For The Administrator); Preparation Flow; Operations Required To Use This Function; Checking The Lan Cable Connection - Konica Minolta bizhub C754 User Manual

3.2

Setting up for IP address fax (for the administrator)

3.2 Setting up for IP address fax (for the administrator)
3.2.1

Preparation flow

1
Connecting this machine to the network

% Checking the LAN cable connection

% Checking the network settings

Check that an IP address is assigned to this machine.
2
Setting up the environment for IP address fax

% Configuring the IP address fax environment

Enable the IP address fax function. In addition, configure the sending and receiving functions of this
machine (SMTP) and the operation mode for IP address fax.
% Registering Header Position
Register the machine name, department name, etc. to be printed on faxes.
% Setting the date and time for the machine
Set the date and time on this machine to be printed on sent and received faxes.
3
Configuring the machine to your environment
% Registering a frequently used destination
This will save you the trouble of entering a destination each time you send a fax.
4
Preparation finished
3.2.2

Operations required to use this function

Checking the LAN cable connection
Check that a LAN cable connected to the network is connected to
the LAN port of this machine.
Checking the network settings
Check that an IP address is assigned to this machine. Tap [Utility] - [Device Information], and check that an
IP address is displayed.
d
Reference
If no IP address is displayed, you will need to configure the network. For details, refer to [User's Guide: Web
Management Tool].
Configuring the IP address fax environment
Enable the IP address fax function. In addition, configure the sending and receiving functions of this machine
(SMTP) and the operation mode for IP address fax.
How to configure the setting is explained using Web Connection. For details, refer to [User's Guide: Web
Management Tool].
bizhub C754/C654
3
3-3