[Original Settings] - Konica Minolta bizhub C754 User Manual

[Original Settings]

To display: [Scan/Fax] - [Application] - [No. of Originals] - [Original Settings]
Configure the setting so as to scan originals accurately according to the properties of the originals to be load-
ed.
Settings
[Original Setting]
[Despeckle]
[Blank Page Removal]
[Binding Position]
[Original Direction]
Related setting
- If blank pages are not detected correctly although [Blank Page Removal] is enabled to scan an original,
adjust the level to detect blank pages. For details, refer to page 6-8.
bizhub C754/C654
Description
Configure the setting so as to scan originals accurately according to the
properties of the originals to be loaded.
• [Mixed Original]: Even for an original with pages of different sizes, by
using ADF, you can scan data while detecting the size for each page.
If the widths of the originals are the same, select [Same Width]. If the
widths of the originals are different, select [Different Width].
• [Thin Paper Original]: Reduce the original feed speed of the ADF to pre-
vent the original from getting caught.
• [Z-Folded Original]: Even the original sizes of folded originals can be
detected accurately.
• [Long Original]: Select this option to load an original that has the longer
feeding direction than the standard size (11 e 17 or A3).
Scan originals using the ADF while removing dust from the Slit Scan
Glass.
It takes longer to finish scanning, compared to the normal operation.
Blank pages contained in the original loaded into the ADF are skipped
when the original is scanned.
Select this check box when scanning an original that contains blank pages.
Any blank pages that are detected are not counted as original pages.
When scanning a 2-sided original, select the original binding position to
prevent the binding positions being reversed between the front and rear
faces.
• [Auto]: The binding position is automatically set. A page binding posi-
tion along the long side of the paper is selected if the original length is
11-11/16 inches (297 mm) or less. A page binding along the short side
of the paper is selected if the original length exceeds 11-11/16 inches
(297 mm).
• [Left Bind]: Select this option when the binding position is set to the left
of the original.
• [Top Bind]: Select this option when the binding position is set to the top
of the original.
Specify the orientation of the loaded original.
5
5-13