If the transmission completes successfully, the message <Sent OK> appears in
the Job Monitor area for approximately two seconds.
After the original has been sent, Direct Sending is canceled automatically.
NOTE
To cancel transmission, press [Cancel] on the touch panel display or
the control panel. Scanning and transmission of documents are canceled from the
time you cancel the transmission.
Sending Fax Documents Manually
This mode enables you to manually send fax documents after checking that the
destination is ready to receive fax transmissions. Use manual sending if the
recipient does not have a fax machine that can receive automatically.
IMPORTANT
•
Manual Sending enables you to send a document consisting of two or more pages only if
you use the feeder to send it. You can only send one page at a time when you place your
originals on the platen glass.
•
If you cancel Manual Sending during transmission, the pages that have already been
scanned are sent. You can check how many pages have been sent to the destination by
printing an Activity Report. (See Chapter 10, "Printing Communication Reports," in the
Sending Guide.)
1
Press
2
Place your originals.
NOTE
For instructions on placing your originals, see "Placing Originals," on p. 1-34.
(SEND).
(Stop) on
2-27
Sending Methods
2