Scan Density and Original Type Settings
You can set the scan density and select the original type before scanning the
original.
Manual Density Adjustment
You can manually adjust the scan density to the most appropriate level for the
original.
2
1
2
3
2-10
Scan Settings
Place your originals ➞ specify the destination.
NOTE
•
For instructions on placing your originals, see "Placing Originals," on p. 1-34.
•
For more information on specifying the destination, see "Dialing Methods," on
p. 2-35.
Press the Scan Settings drop-down list ➞ press [Option].
If necessary, see the screen shot in step 2 of "Specifying the Document Size," on
p. 2-5.
Press [Light] or [Dark] to adjust the scan density ➞
press [OK].
Press [Light] to move the indicator to the left to make the density lighter, or press
[Dark] to move it to the right to make the density darker.
The selected mode is set, and the display returns to the Send Basic Features
screen.