Forwarding Received Documents
If Forwarding Settings in System Settings (from the Additional Functions screen) is
set to 'On', received documents are forwarded to a destination that has been
registered in the machine beforehand.
Follow the procedure below to place the machine in the Forward mode.
IMPORTANT
•
To use this function, you should specify the forwarding conditions beforehand. For
details, see Chapter 9, "System Settings," in the Sending Guide.
•
If an error occurs when forwarding a document, the received fax/I-fax document is erased
from memory even if the Memory Lock mode is set to 'On'.
NOTE
If you set the Forward mode, <Forward conditions applied> appears in the Job Monitor
Area.
1
Press
[Forwarding Settings].
If the System Manager ID and System Password have been set, enter the System
Manager ID and System Password using
(Log In/Out).
NOTE
If the desired setting is not displayed, press [▼] or [▲] to scroll to the desired
setting.
(Additional Functions) ➞ [System Settings] ➞
Receiving Print Jobs and Fax Documents
(numeric keys) ➞ press
-
2
2-61