Resolution - Canon MF7280 - ImageCLASS B/W Laser Facsimile Manual

6
2

Resolution

You can specify the resolution before scanning the original.
IMPORTANT
• If you are sending documents by fax, the maximum size of an image that you can send at
a resolution of 400x400 dpi is 11" x 17".
•
If you are sending documents by fax, select B&W 200x100 dpi, B&W 200x200 dpi, B&W
200x400 dpi, or B&W 400x400 dpi. Otherwise, the document will be sent with poor

resolution.

NOTE
The default setting is 'B&W 200x200 dpi'.
1
2
2-8
Scan Settings
Press (Start).
If the original is placed on the platen glass, follow the instructions that appear on
the touch panel display ➞ press
is complete, press [Done].
Scanning starts.
The scanned data is sent to the specified destination when scanning is complete.
NOTE
To cancel this setting, press the Scan Settings drop-down list ➞ press [Option] ➞
•
[Cancel].
• To cancel all settings and return the machine to the Standard mode, press
(Reset).
Place your originals ➞ specify the destination.
NOTE
•
For instructions on placing your originals, see "Placing Originals," on p. 1-34.
• For more information on specifying the destination, see "Dialing Methods," on
p. 2-35.
Press the Scan Settings drop-down list ➞ press [Option].
If necessary, see the screen shot in step 2 of "Specifying the Document Size," on
p. 2-5.
(Start) once for each original. When scanning