Setting The Display Language; Selecting The Type Of Telephone Line - Canon MF7280 - ImageCLASS B/W Laser Facsimile Manual

• Date and Time
- The date and time of the transmission are recorded.
• I-Fax Address or Fax Number
- Your machine's I-fax address or fax number is recorded.
• Sender's Name (TTI (Transmit Terminal Identification))
- The name registered as the unit name is recorded.
1
• Page Number
- The current page number out of the total number of pages of the original is recorded.
NOTE
If the machine is set so that the sending record is printed at the top of the recording
paper, and not all of the items are registered, only the required registered items and the
total number of original pages are printed.

Setting the Display Language

If you decide to switch the display language, set Language Switch in Common
Settings (from the Additional Functions screen) to 'On' before entering characters.
If Language Switch is set to 'Off', and then you set it to 'On' after entering
characters, the characters may not be displayed correctly. In this case, re-enter the
characters after setting Language Switch to 'On', or enter characters with
Language Switch set to 'Off'.

Selecting the Type of Telephone Line

Set the type of telephone line that is connected to the machine.
If you are not sure what type of telephone line you have, check with your local
telephone company. To operate the Fax function, you must know whether the
machine is connected to a touch-tone or rotary pulse telephone line. The machine
can be set to operate with either type of telephone line.
Be sure to check the type of telephone line you are using, and make the correct
setting. If this setting is incorrect, you will not be able to communicate with other
machines.
Follow the procedure below to switch the fax setup between tone and pulse dialing.
NOTE
The default setting is 'Tone'.
1-10
Things You Must Do Before Using This Machine